User's Manual

The Correlator
48
6.5 Commissioning
6.5.1 Switch the Correlator ON/OFF
The Correlator is switched on with the I/O pushbutton . The device requires a few
seconds to boot. Then the Start menu appears on the screen. The device is now ready.
To switch the Correlator off, press the I/O pushbutton until the screen turns off
(approx. 2 seconds).
The Correlator automatically switches off if no entry is made within a specified time
period. This timespan can be configured in the system settings (see page 51).
6.5.2 Basic settings at initial start-up
When the Correlator is switched on for the first time, two consecutive Welcome menus
appear on the screen. There, some basic system settings have to be made before the
Start menu can be entered.
Select your language in the first of the two menus. Use the first pull down list to do so.
The Correlator's operating language immediately adapts to your selection. After that,
enter the remaining requested details.
Line Description
Daylight saving time
Select whether it is currently winter or summer time.
Date format
Select the date format to be used by the Correlator.
DD
MM
YYYY
...
...
...
Day
Month
Year
Date / Time
Enter the current date and time (hour:minute:second) for the
Correlator.
Confirm with OK. The menu is closed. The settings are accepted.
Switching ON
Switching OFF
Auto-OFF
Language,
date and time