User's Manual

The Correlator
46
For entering a device ID the following screen view, or a similar one, opens:
DEL
... Deletes the last character
ENTER
... Confirms and completes the entry
Accept
... Accepts and enters the automatically detected ID
Decline
... Does not accept the automatically detected ID
Finish
... Completes the automatic detection
For the manual entry of IDs, use the number pad displayed. Confirm with the ENTER
button.
To the right of the number pad, there are fields and buttons for the automatic sensor
detection. The devices concerned must be close to the Correlator.
To register a Power transmitter, briefly press the I/O pushbutton of the device. To
register a Multi sensor, briefly move a magnet past the sensor's I/O area, so that the
LED lights up briefly. As a result, the device's ID is sent, detected by the Correlator and
displayed on the screen. Using the buttons the detected ID can be accepted or declined.
This way several device IDs can be added to the Correlator in quick succession.
6.4.3 Entering text
To enter comments or similar, a virtual keyboard appears on the screen. Enter the
required text and confirm with OK.
Manual entry
Automatic detection