User's Manual

Technical description
29
3.3 Communication of the components
The components of the system communicate with each other in the following ways:
Participating devices Communication channel
Correlator ļ Power transmitter Short range radio (digital or analogue)
Correlator ļ Multi sensors Short range radio (digital)
Correlator ļ Computer USB cable
Correlator ļ Ground microphone Connection cable
3.4 Power supply
The Correlator, the Power transmitters and the Multi sensors come with internal
rechargeable Li-Ion batteries.
The storage places of the individual devices in the transport case function as charging
stations. As soon as a device is placed in/on its station in the case, the device is
automatically charged, provided the case is connected to the mains.
The case can be connected via the connection socket and the supplied connection
cable to either a 12 V connector of a vehicle or to the mains
NOTE
When connected to the electrical system of a car, the transport case is
powered by the vehicle's battery, even while the vehicle is not in
operation. This could result in the complete discharge of the vehicle
battery.
When you park the car, disconnect the Correlux transport case from the
vehicle power supply.
NOTE
Use inductive charging units inside for COR PT-3 and COR MS-3 only!
NOTE
Close cover of transport case if it is raining!
You can find more information in the chapters which describe the individual devices.