User's Manual

Frequently used menus
13
2.2 Pipe data menu
In the Pipe data menu the properties of the pipe can be specified.
The menu can be opened by:
• tapping the button in the main menu
• tapping the button between the two diagrams in the Correlation menu, representing
the pipe (see next section: button )
Material
... Select the pipe section's material.
Diameter
... Select the pipe section's diameter.
Velocity
... Input field for the pipe section's sound velocity.
The displayed value automatically adjusts to the selected pipe
material. The value can be entered manually when needed as well. To
do so, tap the field. A numeric keypad opens.
Length
... Input field for the pipe section's length.
Tap the field. A numeric keypad opens.
Use these buttons to divide the pipe line displayed in up to 12 sections.
Use these buttons to move from one pipe section to the next.
The selected pipe section is "highlighted" with a white bar. The pipe parameters in the
four input fields refer to this section.
Drop down lists
Input fields
Buttons
Pipe section
material
Len
g
ths of the
pipe section
ID of the sensor
at the first
measuring point
ID of the sensor
at the second
measuring point
Visual
illustration of
the
p
i
p
eline
Totallength of
the
p
i
p
e between
the measuring
points