User's Manual

Firmware update
114
Step Description
6 In the displayed menu, tap the Connect button.
Result: The Correlator is automatically detected by the computer as a mass
storage device. The following menu opens:
7
Computer:
Copy the firmware update-files (see step 1) to the root directory of the
Correlator. By that, the outdated firmware file must be overwritten there.
8 Correlator: Tap the OK button.
Result: The connection to the computer is disconnected. The connection cable
can be removed.
9
Switch the Correlator off.
10
Switch the Correlator on.
Result: The firmware update is performed. A bar on the screen shows the
progress of the process.
NOTE
The Correlator must not be operated while the update process is
in progress, i.e. as long as the bar is shown on the screen.
Doing so may cause irreparable damages.
As soon as the update process is finished the Start menu appears on the screen.
At the bottom left the new firmware version is displayed.
The device now is ready for use.