User's Manual

Pinpointing
108
Proceed as follows:
Step Description
1
In the main menu, tap the button .
2 In the displayed menu, tap the Tools button.
3 In the displayed menu, tap the Pinpointing button.
4
In the displayed menu, tap the lower button.
4
In the displayed menu, select the sensors that shall be used. Tap the appropriate
field to enable/disable the checkbox.
Only "enabled" sensors will be part of the measurement.
5 Tap the Start pinpointing button.
Result: A connection is established between the Correlator and the sensors. On
the screen, the pinpointing view appears (see below in the text).
The sensors start measuring. The measured values are periodically retrieved from
the individual sensors and displayed by the Correlator.
6
Wait until the displayed values have come to rest at a stable level.
The drop symbol identifies the measurement with the highest minimum value.
This means that the leak noise at this measuring point is the loudest.
Use the OK button to finish the pinpoint location.
Procedure