User's Manual

The Power transmitters
46
The Power transmitters have the following lights (LEDs):
Element Description
Row of LEDs
lit green … represents the current battery level
lit red … represents the noise level
Radio LED
lit green … the device is switched on
flashing … the device is charging
not lit … the device is switched off
I/O LED
lit red … the device is in "Active" mode,
noise measurement in progress
measurement data is being sent to the correlator
not lit … the device is in "Stand-by" mode,
no measurement in progress,
no radio traffic
5.2 Identification number (ID)
Each Power transmitter has its own six-digit identification number (short: ID). Using this
ID the device in the correlator and the Correlux View PC software can be managed and
clearly identified.
The ID is deduced from the last six digits of the device's serial number (short: SN).
You find the serial number on the nameplate of the device.
When inputting an ID on the correlator or computer, the preceding zero digits can be
omitted.
Indicator light