User's Manual

The Correlator
43
Frequency
scale
Select if the X-axis of the coherence diagram in the Correlation menu
shall ascend in a linear or logarithmic way.
Explanation:
The frequency range of the Correlux C-3 system is from
0 to 3.300 Hz. The logarithmic view results in a wider display area for
lower frequencies.
logarithmic:
linear:
4.6.2 System info
The System settings menu has the following information on the device and the
firmware currently in use:
Line Description
Free space
The correlator's free memory space in MB
Software version
Firmware version
Software date/time
Date of last firmware update
ID
Identification number of the correlator
4.6.3 Store the settings
When leaving the system settings menu all the settings are automatically stored and
accepted.
4.7 Hardware reset
If the correlator stops responding to inputs (neither from touch screen nor from rotary
encoder or pushbuttons), a hardware reset can be performed.
Hold down the rotary encoder and the ESC pushbutton at the same time for
about one second. The correlator restarts automatically. This usually rectifies the
malfunction.
If the malfunction persists after this normal reset, try the following: Hold down the rotary
encoder and the ESC pushbutton at the same time for about three seconds.
The correlator switches off. Wait about a minute before switching the device back on.
The correlator should now function correctly again.
Frequency scale
linear / logarithmic