Manualshelf

User's Manual

ManualsBrandsSeba Dynatronic Mess- und Ortungstechnik ManualsElectronicsMobile device for recording and transmitting leak noises
31323334353637383940
The Correlator
40
4.5.4 Enable/Disable the touch screen (touch sensitivity)
The touch function of the screen can be disabled/enabled. As long as the function is
switched off the correlator can only be operated using the rotary encoder.
Proceed as follows:
Step Description
1
In the main menu, tap the button .
2 In the displayed menu, tap the System settings button.
Result: The system settings menu is opened.
Use the buttons Next and Previous to browse through the available settlings.
3 Look for the Touch option.
Enable/Disable the corresponding checkbox.
4.5.5 Activate the display light
The display light is switched on by
x touching the screen (provided the touch function is not disabled)
x turning the rotary encoder
x pressing the I/O pushbutton briefly
The light remains on for a certain time period. The length of this period (a maximum of
4 minutes) can be adjusted in the system settings.