User's Manual

Frequently used menus
11
2.2 Pipe data menu
In the Pipe data menu the properties of the pipe can be specified.
The menu can be opened by
x tapping the button in the main menu
x tapping the button between the two diagrams in the Correlation menu,
representing the pipe (see next section: button )
Drop-Down Lists:
Material … Select the pipe section's material.
Diameter … Select the pipe section's diameter.
Input fields:
Velocity … Input field for the pipe section's sound velocity.
The displayed value automatically adjusts to the
selected pipe material. The value can be entered
manually when needed as well. For this purpose,
tap the field. A numeric keypad for input opens.
Length … Select the pipe section's length.
Tap the field. A numeric keypad for input opens.
Use these buttons to devide the pipe line displayed in up to
12 sections.
Use these buttons to move from one pipe section to the next.
The selected pipe section is "highlighted" with a white bar. The pipe parameters in the
four input fields refer to this section.
pipe section
material
pipe section
length
Visualization o
f
the pipe line
Sensor ID at
1st measuring
point
Sensor ID at
2nd measuring
point
Total length of
the line
between the
meas. points