Manualshelf

User's Manual

ManualsBrandsSeba Dynatronic Mess- und Ortungstechnik ManualsElectronicsPortable device for reading audio data from acoustical sensors and correlating these data
68697071727374757677
GPS position data
74
Step Description
3
Tap the field of the sensor whose position is to be determined.
Result: The GPS menu is opened. The GPS receiver is searching for available
satellites.
After a while, the current GPS time is displayed.
As soon as the position of the Correlator can be calculated, the current latitude
and longitude are specified.
You can change the format for displaying the GPS position. Tap the GPS format
button repeatedly to select one of the following formats:
x Decimal degrees
x Degrees, minutes
x Degrees, minutes, seconds
The vertical green bar at the right of the screen indicates how high the accuracy is
with which the position can currently be determined.
4
Wait until the position has leveled out on a reliable value. The bar to the right
should show an accuracy of 100%.
The first time the position is determined after connecting the GPS module
may take a little time. The Correlator should not be moved during this
phase. It is best to put it down somewhere.
5 Tap the Store button.
Result: The coordinates are accepted. The display returns to the previous menu.