User's Manual

Offline measurement - Multipoint correlation with preprogrammed sensors
60
To read the measuring data from the sensors, proceed as follows:
Step Description
1
In the Start menu, select the required Offline measuring mode.
2 In the displayed menu, tap the Read button.
Result: The Correlator successively contacts all sensors. Thereby, the devices
are synchronized again. Then, the following menu appears:
3
If you want to read the audio files of all
sensors, tap the Read all button.
If you want to read just one sensor, tap
the field of the sensor in question.
Result: The audio files are successively transferred. The progress of the
operation is shown in the individual fields.
Use the ESC pushbutton to return to the Start menu.
Reading out data
Radio packages
received
Audio files
received