User's Manual

Offline measurement - Multipoint correlation with preprogrammed sensors
58
Configure the sensors for the measurement:
Step Description
7
All sensors must be turned on.
8
In the Start menu, select the required Offline measuring mode.
9 In the displayed menu, tap the Program button.
Result: In the displayed menu, the up to 8 fields represent the sensors of the
Correlator's sensor pool.
10
Select the sensors that shall be programmed. Tap the appropriate field to
enable/disable the checkbox.
Only "enabled" sensors will be programmed and can be part of the measurement.
11 Tap the Program and Synchronize button.
Programming and
deploying sensors