Manualshelf

User's Manual

ManualsBrandsSeba Dynatronic Mess- und Ortungstechnik ManualsElectronicsPortable device for reading audio data from acoustical sensors and correlating these data
41424344454647484950
The Multi sensors
49
6 The Multi sensors
6.1 Design
Each Multi sensor has a highly sensitive piezo microphone with active amplifier, a data
memory, a rechargeable Li-Ion battery and a radio module with antenna inside.
The devices have the following external characteristics:
Element Description
Indicator light
flashes green … battery OK
flashes yellow … battery critical
flashes red … device needs to be re-charged
flashes rapidly … device is charging
no light … device is turned off
ON/OFF contact area I/O
Magnetic foot (replaceable)
Type plate
Carrying ring (removeable)
6.2 Identifikationsnummer (ID)
Each Multi sensor has its own six-digit identification number (short: ID). Using this ID the
device in the correlator and the Correlux View PC software can be managed and clearly
identified.
The ID is deduced from the last six digits of the device's serial number (short: SN). You
find the serial number on the nameplate of the device.
When inputting an ID on the correlator or computer, the preceding zero digits can be
omitted.