Operation Manual

IF AND WHEN ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 3.79
TIPS AND MAINTENANCE
CC –– SSiiddee lliigghhtt bbuullbbss
•
Open the bonnet.
•
Remove the cover, loosening screws
11
.
•
Unhook spring clips
22
in direction of
arrow and fold away.
•
Remove bulb holder from the reflector.
•
Take bulb out.
•
Fit the new bulb.
•
Insert bulb carrier into reflector.
•
Replace plastic cover.
DD –– IInnddiiccaattoorr bbuullbb
•
Open the bonnet.
•
Remove the cover, loosening screws
11
.
•
Unhook spring clips
22
in direction of
arrow and fold away.
•
Disconnect the connector, pressing the
spring tab.
•
Turn holder to right and remove it from
its housing.
•
Turn the bulb to the left and replace it.
•
To re-assemble do the same steps in
the reverse order.
•
Plug in the connector
•
Replace the plastic cover.
D
TO8-044D
C
TO8-044C