User manual

SeaSTAR 3100LRS USER MANUAL

Issue 1.0 08/02

Wait Scan This is the length of time the

receiver will spend trying to lock into

each signal that it knows about.

Change the wait scan using the up and

down arrows, then press centre button

before moving on - The display will

briefly flash “INPUT ACCEPTED”

If the ⇒ key is pressed again the Autoscan Selection menu option reappears.

Pressing the ⇓ key moves onto the next menu.

NB.

Changing services will reset the site tables in the receiver. The reference

sites used in the VBS calculation are different between services.

Wait Scan = 00030sec

RECV →

FSPAS Ref.: B31005102PMBRA0