User manual

SeaSTAR 3100LRS USER MANUAL
Issue 1.0 08/02
32
Remote Sites Menu for DGPS Service
When using the VBS or HP service this menu does not apply. Use only if
you want to output a single station into an external GPS receiver
The menu allows the operator to select RTCM data output from a single
reference station, or from a subset of the total number of stations transmitted
on the Starfix channel, if using the receiver only.
Remote Site Selection by pressing the
⇒ key the following sequence occurs.
Pressing the ⇐ key gives the same
fields in reverse.
Pressing the ⇒ key once after the menu
prompt gives “Toggle all sites OFF” as
the first choice.
Pressing the ⇐ key once from the menu
prompt gives “Toggle all sites ON” as
the first choice.
Pressing either ⇒ or ⇐ again selects
stations #1 to #31 individually. If Site
Mapping messages are being
transmitted stations will display their
actual ID’s. Unused spaces in the
Supercompressed format will show
station ID’s between the end of the valid
range and 31.
Either..
or...
If the ⇒ key is pressed again the Remote Sites menu option reappears.
Pressing the ⇓ key moves onto the next menu.
A
ll sites OFF
RECV →
Id : # 00325 ON
RECV →
ID ; # 00325 OFF
RECV →
RECV →
A
ll sites ON
RECV →
Remote Sites . . .
FSPAS Ref.: B31005102PMBRA0