User manual

SeaSTAR 3100LRS USER MANUAL
Issue 1.0 08/02
30
Maintenance Menu
Entries within this menu are of not generally of interest to the normal user,
however, occasionally the user may be asked to report this data to the service
provider in the event of problems therefore they are included for completeness.
Maintenance Menu by pressing the ⇒
key the following sequence occurs.
Pressing the ⇐ key gives the same
fields in reverse.
Security shows the Security Mask
programmed into the receiver it is
displayed as a 32bit hex number. The bit
settings in this word determine the
functionality of the receiver available to
the user.
Site Permission Mask it is displayed as
32 bit hex number. The Site Permission
Mask determines what reference station
data is available to the user when RTCM
output is selected.
Would indicate all stations enabled.
Bit Error Rate indicates current (2 min
average) Bit Error Rate.
Checksum Status shows the number of
messages received since power On
which have valid (OK) Checksum and
the number Invalid (BAD).
Subscription Mode This shows the
user whether the receiver is in standard
(STD) or USA (US) subscription mode.
Maintenance
RECV →
Securty = 00030DFD
RECV →
SPMask = XFFFFFFFE
RECV →
RECV →
OK 491 BD 5
RECV →
Subs Mode : STD
Set VBS Position
RECV →
Mask = 0xFFFFFFFE
RECV →
BER <1.0E-08
RECV →
FSPAS Ref.: B31005102PMBRA0