User manual

SeaSTAR 3100LRS USER MANUAL
Issue 1.0 08/02
27
3100LRS Virtual Reference Cell (VRC) Services Menu
This menu is exactly the same as the VBS Services menu, except that the title
is VRC Services. This menu only appears if detector mode is set to VRC.
3100LRS Virtual Reference Cell (VRC) Controls Menu
Allows setup of the internal VRC processor primarily used when an external
GPS receiver is used.
VRC Controls (VRC Service only)
by pressing the ⇒ key the following
sequence occurs. Pressing the ⇐ key
gives the same fields in reverse.
Pressing either ⇒ or ⇐ again selects
cells #1 to #31 individually. Cells will
display their actual ID’s (0-1-23), but
only if they are enabled in the Cell Mask
Either…
Only one cell will be shown as AUTO,
the rest will be shown as OFF. The
Receiver will automatically select the cell
that is closest to the user’s current
location. If the ⇒ key is pressed until
the VRC Controls menu appears then
pressing the ⇓ key moves onto the next
menu.
or …
Cell ID # 0001 ON
RECV →
Cell ID # 0002 OFF
RECV →
RECV →
VRC Cont
r
ol ………
FSPAS Ref.: B31005102PMBRA0