User manual

SeaSTAR 3100LRS USER MANUAL

Issue 1.0 08/02

3100LRS Virtual Base Station (VBS) Control Menu

Allows setup of the internal VBS Processes primarily used when an external

GPS receiver is used.

BS Controls (VBS extensions only)

by pressing the ⇒ key the following

sequence occurs. Pressing the ⇐ key

gives the same fields in reverse.

Input VBS Process Latitude Use the ⇑

and ⇓ keys to increase or decrease the

number in each field to the correct value,

also for N/S or E/W.

Input VBS Process Longitude Use the

⇑ and ⇓ keys to increase or decrease

the number in each field to the correct

value, also for N/S or E/W.

Confirm Entry Following input of lat and

long, send the new entries into the VBS

process by using the centre button on

this menu item. Screen will then read

“Input Accepted”.

If a GPS is installed you will see :

If the ⇒ key is pressed again the 3100LRS VBS Control menu option

reappears. Pressing the ⇓ key moves onto the next menu.

Lat : N 00 00’ 00.000”

RECV →

Lon : E 00 00’ 00.000”

RECV →

Set VBS Position

RECV →

VBS Controls………

GPS OK/AUTO Mode

RECV →

FSPAS Ref.: B31005102PMBRA0