User manual

SeaSTAR 3100LRS USER MANUAL
Issue 1.0 08/02
21
User Settings Menus
Configures the data interfacing from the receiver to external equipment.
By pressing the ⇒ key the following
sequence occurs.
Command Rate sets the baud rate for
the command port used for inputting
commands to the receiver from an
external PC.
Data Rate sets the baud rate for the
data port used for output of DGPS
correction data or enhanced position
data.
Auxiliary Rate sets the baud rate for the
auxiliary port used for several different
uses.
Internal GPS Port
Detector Mode controls how the
receiver processes and the output
format of the differential corrections
received over the Starfix channel. The
selections are HP/VRC/VBS,RTCM,
RAW, PROM and OFF.
Contrast controls the intensity of the
backlit display.
RTCM OUT controls the termination of
RTCM strings. Both these options
should normally be left as Y for yes.
Except for specific GPS units
User settings ...
RECV →
DATA 9600,8,N,1
RECV →
DemodMode VBS
Contrast 7
RECV →
RECV →
A
UX 4800, 8, N, 1
RECV →
CMD 9600, 8, N, 1
RECV →
RTCM CR? Y LF? Y
RECV →
IGPS 4800,8, N, 1
FSPAS Ref.: B31005102PMBRA0