User manual

SeaSTAR 3100LRS USER MANUAL
Issue 1.0 08/02
20
Current Readings Menus
Shows performance of the receiver section
By pressing the ⇒ key the following
sequence occurs. Pressing the ⇐ key
gives the same fields in reverse.
Power shows the receive power in dB,
this value is useful in determining the
correct operation of the LNA.
Signal Quality shows a unit less hex
value that indicates the signal quality. It
is based on the I and Q values used in
the signal tracking process.
Actual Frequency shows actual
operating frequency of the receiver, this
will differ from the user selected Channel
frequency.
Service Identity is the P-MP service
identifier, the number is in hex and is
x2873 for Perth or US uplinks, and
xC685 for the Eik, Norway AORE and
IOR uplinks.
Date & Time will start off from the
firmware date until UTC time is received
from the satellite after 20 min.
If the ⇒ key is pressed again the Current readings menu option reappears.
Pressing the ⇓ key moves onto the next menu.
Current Reading ...
RECV →
Power = -93 dBm
RECV →
Signal Qual = 8
RECV →
A
Freq = 1558511133
RECV →
RECV →
Service Id X2873
RECV →
A
pr02 08:02 2001
FSPAS Ref.: B31005102PMBRA0