User manual

SeaSTAR 3100LRS USER MANUAL
Issue 1.0 08/02
11
Auxiliary
The Auxiliary port is a standard DB9 female socket. This port can be used to
send enhanced RTCM (GPS correction) data to an external GPS receiver.
However, it is necessary to first configure the Fugro SeaSTAR receiver board
in the 3100LRS. This is carried out using a laptop computer with ‘Toolkit’
software via the Command port.
Pin Number Signal
1 1 DIAG*
2 TXD3
3 RXD3
4 RESET*
5 GND3
6 CAN L*
7 CAN H*
8 TEMPT MON*
9 Q DIAG*
Table 4 Auxiliary Port Pin Assignment ( * no connection by default)
FSPAS Ref.: B31005102PMBRA0