User manual

SeaSTAR 3100LRS USER MANUAL

Issue 1.0 08/02

3100LRS GETTING STARTED

The purpose of this section is to get you started with the 3100LRS as quickly

as possible. The guide will address receiving the satellite data carrier, and then

checking the functionality of the internal GPS engine if fitted. We would ask you

to quickly review the menu section of this manual, the menus are navigated by

the Arrow buttons on the front panel, changes to options are made with the

Up/Down keys, and items are entered using the centre key.

Generally when the receiver is supplied to you it will be configured for the mode

and data link(s) you have subscribed to. In most cases to get up and running

will be a case of connecting the appropriate cables and applying power to the

system.

Initial Setup

Figure 1. Bare Rear View of SeaSTAR 3100LRS

Steps 1 through 8 pertain to all model 3100 receivers, the steps from then on

are grouped by Model/Operation Mode.

1. Refer to the following diagrams as you will need to assemble all the

required items.

• 3100LRS DGPS Receiver

• DGPS Antenna

• DGPS Antenna Cable

• GPS Antenna if supplied

• GPS Antenna cable if supplied

• Power Cable

• Data Port Cable

• Aux. Port Data Cable if supplied

• Power Supply

FSPAS Ref.: B31005102PMBRA0