PRODUCT CARE INFORMATION Updated January 2016 WE STRONGLY RECOMMEND USE OF HIGH QUALITY FURNITURE COVERS The Seasonal Living® INDA Cordless Outdoor Collection is lighting for use in or outdoors. The lighting collection is comprised of 4 separate sets of components: 1. The lamp base–(currently available only in light-weight concrete and ceramic, other materials are being added to this collection) 2. The Polyethylene (PE) lampshade 3.
all wiring is in good condition before charging / recharging the LED Lamp and using the charging plate READ, FOLLOW AND UNDERSTAND ALL MANUFACTURER’S INSTRUCTIONS BEFORE USE WIND CONDITIONS / WEIGHTING THE LAMP BASE We recommend that during strong winds that you either re-locate the lamp in a protected space or add sand into the lamp base to further weight the base down to prevent it falling over.
lamp base is a small sample bottle of sealer attached to a red piece of ribbon. Follow instructions on the side of the bottle. Depending on where and how often you use your concrete lamp base product, we recommend more regular sealing (especially for outdoor use or heavy soiling from acid based and or oil based stains and liquids at least 3-4 times per year.
CONDITIONS THIS WILL FREEZE TO THE LAMP BASES AND CAN DAMAGE THE LAMP BASES. Note: Plastic covers with no moisture wicking capability will freeze on to the side of the concrete lamp base and will damage the concrete. HOW TO CARE FOR YOUR POLYETHYLENE LAMP SHADE Your Polyethylene lamp shade is suitable for outdoor, normal every day weather conditions including, rain and sunshine. Over time, you may notice slight changes in the color of the lampshade, but this will occur gradually over a prolonged period.
IMPORTANT TECHNICAL INFORMATION REGARDING YOUR LED LIGHT • Each LED light is completely sealed. Do not attempt to open or tamper with any part of the lighting casing – it is unnecessary and will Void any Manufacturer’s Warranty associated with this product.
• Electrical Plug and wire UL rated – Class B • Charging Plate Input: DC 7.
TROUBLE SHOOTING GUIDE FOR THE LED LIGHT & CHARGING PLATE PROBLEM: LED LIGHTIS NOT BRIGHT POSSIBLE SOLUTION(S): 1. Please put the LED light on to the charging plate. The Indicator light will turn red, it is charging. 30 minutes later, please try to turn on light again. If the light is brighter, then continue to charge the indicator light turns blue in the LED light (approx. 4-5 hours). 2. If after charging for 30 minutes the light is still not bright.
INDA ASSEMBLY INSTRUCTIONS 150129V1LAR x1 x9 x9 4 2 IF ADDED WEIGHT IS DESIRED FILL WITH SAND WITH FUNNEL THROUGH HOLE ON TOP OF BASE BEFORE ASSEMBLY 1 SEE REVERSE FOR CHARGING INSTRUCTIONS FLOOR & TABLE LAMP ASSEMBLY INSTRUCTIONS 5 U.S.
