Specifications

• Electrical Plug and wire UL rated – Class B
• Charging Plate Input: DC 7.5V
• Operating Current: 1A
• Charging Time: 6 Hours
• LED light operating time: 8 hours
• Use charging plate in indoor environments only – not suitable for full outdoor or wet or damp
location exposure charging
• Charging plate will not charge LED lights at temperatures above 115 degrees Fahrenheit or below
30 degrees Fahrenheit
• When charging LED light, best operating environment temperature is between 10 degrees and 35
degrees Celsius / 50 degrees F – 113F
• Base of concrete floor lamp measures: 11 1/8" diameter
• Base of concrete table lamp measures: 8" diameter
• CHARGING THE LED LIGHT
1. Connect the electrical cord into the charging plate socket and connect the plug into a wall socket
(check that your electrical source is to USA standards – voltage of AC 100V-240V) !
2. Place the LED Light directly on top of the charging plate–make sure that they connect and the LED
light sits evenly on the charging plate – if it is correctly positioned a red light will indicate in the
LED light showing that the LED light is in charging mode !
3. The LED light will turn blue when the LED light is fully charged !