User manual
Table Of Contents
- Front cover
- CAUTION
- IMPORTANT SAFETY INSTRUCTIONS
- Canadian Compliance
- Software License
- Copyright
- CONTENTS
- INTRODUCTION
- BASIC OPERATION
- AUDIO/VIDEO CONNECTIONS
- RF BYPASS
- OPTIMIZING YOUR DCT* OUTPUT SETTINGS
- User Options
- CONNECTING YOUR DCT*
- CONNECTING YOUR DCT* TO A HDTV – VIDEO ONLY
- CONNECTING YOUR DCT* TO A HDTV – AUDIO ONLY
- CONNECTING YOUR DCT* TO AN A/V RECEIVER – AUDIO ONLY
- CONNECTING YOUR DCT* TO A STEREO TV
- CONNECTING YOUR DCT* TO A STEREO TV AND STEREO VCR
- CONNECTING YOUR DCT* TO AN A/V RECEIVER, TV, AND VCR
- CONNECTING YOUR DCT* TO A STEREO TV, VCR, AND DVD
- RECORDING YOUR CONNECTIONS
- GRAPHICS OVERLAYING THE VIDEO
- DATA DEVICES
- TROUBLESHOOTING
- The DCT* will not power on
- The remote control does not work
- There is no audio when viewing cable channels
- There is no audio from the center and/or surround speakers of a home theater receiver connected to the DCT*
- There is no video on the TV screen
- There are no graphics, closed captions, or program guides appearing on the TV screen
- There are black bars to the right and left of the picture
- There are black bars above and below the picture
- There are black bars on all four sides of the picture
- SPECIFICATIONS
- Back Cover
DCT6200/DCT6208 User Guide
25
Connecting a Stereo TV and Stereo VCR
1 Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN connector on the DCT*.
2 Connect a stereo audio cable to the AUDIO OUT R and L connectors
on the DCT* and the
INPUT AUDIO R and L connectors on the stereo
VCR.
3 Connect a video cable to the VIDEO OUT connector on the DCT* and
the
INPUT VIDEO connector on the stereo VCR.
4 Connect a stereo audio cable to the OUTPUT AUDIO R and L
connectors on the Stereo VCR and the
INPUT AUDIO RIGHT and LEFT
connectors on the stereo TV.
5 Connect a video cable to the OUTPUT VIDEO connector on the stereo
VCR and the
INPUT VIDEO connector on the stereo TV.
The video connection method does not support high definition video. For
more information, see “Connecting your DCT* to an HDTV – Video Only”
on page 16.