User manual
Table Of Contents
- Front cover
- CAUTION
- IMPORTANT SAFETY INSTRUCTIONS
- Canadian Compliance
- Software License
- Copyright
- CONTENTS
- INTRODUCTION
- BASIC OPERATION
- AUDIO/VIDEO CONNECTIONS
- RF BYPASS
- OPTIMIZING YOUR DCT* OUTPUT SETTINGS
- User Options
- CONNECTING YOUR DCT*
- CONNECTING YOUR DCT* TO A HDTV – VIDEO ONLY
- CONNECTING YOUR DCT* TO A HDTV – AUDIO ONLY
- CONNECTING YOUR DCT* TO AN A/V RECEIVER – AUDIO ONLY
- CONNECTING YOUR DCT* TO A STEREO TV
- CONNECTING YOUR DCT* TO A STEREO TV AND STEREO VCR
- CONNECTING YOUR DCT* TO AN A/V RECEIVER, TV, AND VCR
- CONNECTING YOUR DCT* TO A STEREO TV, VCR, AND DVD
- RECORDING YOUR CONNECTIONS
- GRAPHICS OVERLAYING THE VIDEO
- DATA DEVICES
- TROUBLESHOOTING
- The DCT* will not power on
- The remote control does not work
- There is no audio when viewing cable channels
- There is no audio from the center and/or surround speakers of a home theater receiver connected to the DCT*
- There is no video on the TV screen
- There are no graphics, closed captions, or program guides appearing on the TV screen
- There are black bars to the right and left of the picture
- There are black bars above and below the picture
- There are black bars on all four sides of the picture
- SPECIFICATIONS
- Back Cover
DCT6200/DCT6208 User Guide
13
Setting Description
4:3 Override
Selects the DVI or YPbPr (Component video) output format of
the DCT* when it is tuned to 4:3 standard definition programs.
Defaults to 480i.
Options are OFF, 480i or 480p. If the DVI/YPbPr Output is set
to 480i, this setting becomes redundant and defaults to OFF.
This setting provides the ability to specify how 4:3 pictures are
to be displayed on your TV. Most TV programming is 4:3
aspect ratio (square).
Selecting OFF will display regular TV programs that are 4:3
aspect ratio in widescreen format. If you have a widescreen
TV, black bars will be placed on the left and right of the picture
to fit your screen. Selecting OFF when you have a 4:3 TV
Type may result in a small picture with black bars on all four
sides of the screen.
Selecting 480i will transmit TV programs that are not high
definition in their original 480i format. Some TVs cannot
display 480i format on their component video inputs (Y Pb Pr).
Check your TV User Guide for more information.
Selecting 480p will convert TV programs that are not high
definition to a higher quality 480p format. Some TVs cannot
display 480p format on their component video inputs
(Y Pb Pr). Check your TV User Guide for more information.
Closed
Caption
Turns closed captions off or on. The LED panel will display the
status of the closed captions. Defaults to DISABLED.
Options are ENABLED or DISABLED.
Pen Size
Selects the font size for closed captions. Defaults to AUTO.
Options are AUTO, STANDARD, LARGE, or SMALL.
Font Style
Selects the font style for closed captions. Defaults to AUTO.
Options are AUTO, MONO SERIF, PROPORTION SERIF,
MONO NO SERIF, PROPORTION NO SERIF, CASUAL,
CURSIVE, or SMALL.
Fore-
ground
Color
Selects the foreground color for closed captions. Defaults
to AUTO.
Options are AUTO, WHITE, BLACK, RED, GREEN, BLUE,
YELLOW, MAGENTA, or CYAN.
Fore-
ground
Opacity
Selects the opacity of the closed captions foreground. Defaults
to AUTO.
Options are AUTO, TRANSPARENT, TRANSLUCENT,
SOLID, or FLASHING.