User manual
Table Of Contents
- Front cover
- CAUTION
- IMPORTANT SAFETY INSTRUCTIONS
- Canadian Compliance
- Software License
- Copyright
- CONTENTS
- INTRODUCTION
- BASIC OPERATION
- AUDIO/VIDEO CONNECTIONS
- RF BYPASS
- OPTIMIZING YOUR DCT* OUTPUT SETTINGS
- User Options
- CONNECTING YOUR DCT*
- CONNECTING YOUR DCT* TO A HDTV – VIDEO ONLY
- CONNECTING YOUR DCT* TO A HDTV – AUDIO ONLY
- CONNECTING YOUR DCT* TO AN A/V RECEIVER – AUDIO ONLY
- CONNECTING YOUR DCT* TO A STEREO TV
- CONNECTING YOUR DCT* TO A STEREO TV AND STEREO VCR
- CONNECTING YOUR DCT* TO AN A/V RECEIVER, TV, AND VCR
- CONNECTING YOUR DCT* TO A STEREO TV, VCR, AND DVD
- RECORDING YOUR CONNECTIONS
- GRAPHICS OVERLAYING THE VIDEO
- DATA DEVICES
- TROUBLESHOOTING
- The DCT* will not power on
- The remote control does not work
- There is no audio when viewing cable channels
- There is no audio from the center and/or surround speakers of a home theater receiver connected to the DCT*
- There is no video on the TV screen
- There are no graphics, closed captions, or program guides appearing on the TV screen
- There are black bars to the right and left of the picture
- There are black bars above and below the picture
- There are black bars on all four sides of the picture
- SPECIFICATIONS
- Back Cover
12
User Options
Setting Description
TV Type
Selects the type of TV. The LED panel will display the output
type you have selected. Defaults to 16:9.
Options are 16:9 (for wide screen TVs); 4:3 LETTERBOX or
4:3 PAN/SCAN (for normal TVs).
4:3 LETTERBOX allows you to view widescreen programming
in a letterbox format through the S-video, composite video, or
RF video outputs when the DCT* is tuned to a widescreen
program. 4:3 PAN/SCAN allows you to view widescreen
programming in 4:3 full screen format through the S-video,
composite video, or RF video outputs when the DCT* is tuned
to a widescreen program.
Y Pb Pr
Output
Selects the video display for the DVI and YPbPr component
video outputs. The LED panel will display the format you have
selected. Defaults to 1080i.
Options are 1080i, 720p, 480p, or 480i.
Some TVs can only support certain display formats. Check
your TV User Guide for more information. If you are not using
an HDTV, selecting a format other than 480i will cause the
on-screen display to go blank. If this happens you can still
view your settings on the LED panel to change the format back
to 480i.