Owner`s manual

Care, Cleaning, Maintenance 6501MA HDTV Monitor Owner's Manual
Step-by-Step Lamp Replacement
1. Turn offthe HDTV monitor.
2. Wait at least 1 minute for the lamp cooling fan to stop.
3. Unplug the HDTV monitor.
4. The lamp is HOT shortly after operation. Allow at least 60 minutes for the lamp to
cool.
5. Remove the speaker grille by carefully pulling the grille away from the front of the
HDTV monitor. The speaker grill is attached by plastic ball-and-socket fasteners
(two along the left side, two along the right side, and 4 in the center).
2 Screws
Figure 25. Speaker Grille and Lamp Access Door Screws
6. Remove the two screws (see Figure 25) and open the lamp access door (see
Figure 26).
Lamp Access Door
(Open)
/
Lamp
Assembly
Figure 26. Lamp Assembly Location
7. Locate the lamp assembly (see Figure 26) and completely loosen the two captive
screws on the lamp assembly (see Figure 27).
8. Grasp the old lamp assembly by the handle (see Figure 27) and gently pull straight
out of the base of the HDTV monitor.
56--DRAFT 2004-05-24-A Veos