Manualshelf

Owner`s manual

ManualsBrandsSears ManualsComputer equipmentVEOS 6501MA
51525354555657585960
6501MAHDTVMonitorOwner'sManual Care,Cleaning,Maintenance
SCREEN AND CABINET CLEANING
Precautions
The screen features a hard-coat surface; however, it can still be scratched. To keep
the screen in its best viewing condition, avoid touching the screen to minimize the
need for cleaning.
• Do not use commercial window cleaning solutions on the screen or cabinet.
• Do not use strong commercial cleaning solutions on the screen or cabinet.
• Do not spray cleaning solutions directly onto the screen or cabinet.
• Do not allow any liquid to drip or run into the HDTV monitor openings, seams, or
around the keys.
• Do not use any abrasive cloths or cleaners on the screen or cabinet.
Cleaning
• Clean the screen and cabinet using a soft cloth dampened with a very mild, soapy
solution. Again, be especially careful not to let any liquid drip or run into the open-
ings, seams, or around the keys.
LAMP ASSEMBLY REPLACEMENT
The lamp is a user-replaceable item. If you are uncomfortable with replacing the lamp,
contact a qualified service professional to replace the lamp. See the back cover of this
manual for service information.
A
Precautions
• Do not defeat any of the power interlocks.
Do not attempt to operate the HDTV monitor without its protective cabinet.
Do not attempt to look at the lamp when it is operating. Unfiltered light from the
lamp is a UV (ultraviolet) hazard and may cause eye damage.
The UV light is filtered and removed inside the internal optical system. The screen
picture is safe to view.
• Do not experiment with a new or spent lamp. The lamp is an arc lamp and has
no filament. The lamp cannot be tested for electrical continuity with an ohm meter.
• Do not touch the lamp with bare hands, even when cold.
The lamp operates at extremely high temperature and pressure. Finger prints
remaining on the glass surface of the lamp may chemically react with the glass,
weaken the glass, and cause the lamp to fail.
If necessary, the lamp can be cleaned with a lint-free towel before operation.
• Do not attempt to remove the spent lamp until after the 60-minute waiting
period.
Lamp Type
• Replace only with an ULTREX3 lamp assembly.
See the back cover for information on obtaining service or replacement parts.
Tools
• #2 Phillips screwdriver.
Veos DRAFT 2004-05-24-A--55