Manualshelf

Owner`s manual

ManualsBrandsSears ManualsComputer equipmentVEOS 6501MA
41424344454647484950
6501MAHDTVMonitorOwner'sManual On-ScreenMenu
i_fi_,i _'J[_lli _
AUDIO
H Position (Horizontal Position)
• Adjust the value from 0 to 100 to adjust the image left or right. The factory setting is
50.
V Position (Vertical Position)
• Adjust the value from 0 to 100 to adjust the image up or down. The factory setting is
50.
Freeze Window
Freeze Window is not available when a PIP window is on the screen.
• Select On to stop the image on the screen or Off to return to the moving image.
Digital Pan and Zoom
Digital Pan and Zoom is not available when a PIP window is on the screen.
• Use Pan to move the viewing area within a zoomed picture. This is only meaningful
at zoom settings greater than 1.
• Use Zoom to view a close-up area of a picture. Zoom range is 1 to 15.94.
PIP Size
PIP Size only appears when a PIP window is on the screen.
• Press • and • keys to decrease or increase the image size.
PIP Position
PIP Position only appears when a PIP window is on the screen.
• Use the • and • keys to choose the PIP position and the SELECTkey to accept the
PIP position.
Volume
• Adjust from 0 to 100 to change the loudness of the audio.
To quickly change the setting, press, or press and hold, VOLUME + or VOLUME - on the
remote control. (See "Volume +/-" on page 32.)
Mute
• Select On to silence the audio. This controls the speakers and rear-panel audio out-
puts, including the subwoofer.
To quickly mute or restore the audio, press MUTE once on the remote control. (See
"Mute" on page 32.)
Closed-Caption Mode
To view any of the closed-caption settings, either:
• Closed Caption must be set to On, or
• Closed Caption must be set to On Mute and Mute must be On.
• CCl--selects the primary language closed-caption text (the text that is coordinated
with the sound)
• CC2--selects the supplemental closed-caption text (displays additional text related
to the program)
• Tl--selects the first text service (information usually not related to the program)
• T2--selects the second text service (information usually not related to the program)
Veos DRAFT 2004-05-24-A_7