Owner`s manual

6501MAHDTVMonitorOwner'sManual Connections
VIDEO 4 and 5
480p/720p/1080i HD Component Inputs
Enhanced definition (480p) and high-definition (720p and 1080i) component video
Use With
Connect
• Progressive-scan DVD player (480p output)
• D-VHS (digital) VCR (480p, 720p, or 1080i output)
• ATSC digital TV tuner set-top box (480p, 720p, 1080i output)
• Digital cable set-top box (480p, 720p, 1080i output)
• Digital satellite set-top box (480p, 720p, 1080i output)
• Connect the HDTV monitor's VIDEO 4 or VIDEO 5 connectors to the YPbPr (green,
blue, and red) connectors on the DVD player or other video component.
• Connect the HDTV monitor's AUDIO IN: L and R connectors to the line-level out-
puts on the DVD player or other component.
• Consult the instruction manual for your audio/video component for connection and
set up information.
VIDEO 4 or V_DEO 5
lnputs
Y (green)/480p, 720p, or 1080i
PB (blue) _ Component Video
_ii_ ii}_ _ PR (red) Jto HDTV Monitor
Rear Connector Panel
Left "]Audio Output
___ _ Right fto HDTV M onitor
Figure 12. Enhanced-Definition and High-Definition Component Connections
Video Component
Settings
Hint
Info
Do either of the following:
• Set the output of the video component to "No Conversion" if available. Otherwise,
set the output of the video component to 1080i.
• See "About 480p/720p/1080i Video-Component Output Settings" on page 59 to
determine how to choose your own setting.
Turning off the progressive-scan feature of the DVD player (switching the output to
480i) and using the VIDEO 1 input may result in a better picture. To learn more, see
"About Deinterlacing and Progressive-Scan DVD Players" on page 58.
Non-progressive-scan DVD players (480i) should be connected to the VIDEO 1.
Connecting a 480p, 720p, or 1080i signal to VIDEO 1(480i) input will not harm the
HDTV monitor, but the video image will not display correctly.
Veos DRAFT 2004-05-24-A--25