Specifications
OPERATION
FOR NORMAL PLAY
1. Switch on the power to the amplifier and select the input source on the amplifier to which this unit is
connected.
2. Press the POWER button. The power indicator will illuminate.
3. Pressthe OPEN/CLOSE button and place a disc on the disc tray.
4. Press the OPEN/CLOSE button once again.
The disc tray will close and the DISC IN indicator will illuminate.
5. Press the PLAY button. The PLAY and TRACK NO. 1 indicators will illuminate. The disc will begin
to rotate, the table of contents will be read out (requires about 10 sec.). The first selection (TRACK
NO. 1) will begin playing.
When the last selection has played, the player will go to pause. The PLAY indicator will go out and the
PAUSE and TRACK NO. 1 indicators will illuminate. (After 10 minutes in pause, the unit will go to
stop. The PAUSE and TRACK NO. 1 indicators will go out.)
6. When play is finished and the unit is not going to be used again right away, open the disc tray, remove
the disc, close the disc tray, and press the POWER button once again to turn off the power.
WHEN STOPPING PLAY PART WAY THROUGH
Press the STOP button. The disc will stop rotating and play will stop. The PLAY and track number indi-
cators will go out.
WHEN REMOVING THE DISC
Pressthe OPEN/CLOSE button. The disc will stop rotating and the disc tray will come out.
WHEN PAUSING
When the PAUSE button is pressed, the player will go to pause. (The disc will continue to rotate. About
10 minutes later, the unit will go to stop.) To cancel pause, press the PLAY button, and play will begin
from where it was stopped.
SELECTION SEARCH
By using the FWD and REV side of SEARCH button, the beginning of desired selections can easily be
found. The number of the selections is indicated on the track number indicators. While searching the
selection, the track number indicator is flashing at high speed. When the selection is found, the indicator
illuminates continuously in normal play - in program play, the indicator will flash slowly.
WHEN GOING TO THE NEXT SELECTION DURING PLAY
Press the FWD side of SEARCH button once.
WHEN GOING TO THE BEGINNING OF THE SELECTION BEING PLAYED
Press the REV side of SEARCH button once. IExample: Beginningof 6th selectionfrom that beingplayed]
WHEN GOING AHEAD SEVERAL SELECTIONS \ /
Example: ISelecti°nb_lingplayedl
V
Beginning of 6th selection from that being played
$
,Fig I I/I I/Press the FWD side of SEARCH button the 2 3 4 5 6 7
number of times necessary to indicate 6 for the
track number indicators (3 times). I" _. -_*"_-"_
\
Fig. 5
-9-