Owner`s manual

SET WATER LEVEL CONTROL

This control gives you the flexibility to

save water when washing small loads.

Your washer lets you select a water

setting based on the size of your

wash load.

• For normal loads, start with a medium

load (see below). Adjust up or down

depending on your load. Clothes should

move freely and roll toward the agitator.

• To change to a higher water level

setting after the washer has started to

agitate, turn the knob to the desired new

setting.

SET WATER TEMPERATURE

CONTROL

Your washer lets you select a wash

water setting based on the type of load

you are washing.

• All rinses are cold to save energy.

WARM

COLD

COLD • HOT

COLD _ COLD

Selecting Water Temperatures

Wash Water

Temperature Suggested Fabrics Comments

HOT , Work clothes • Best cleaning for heavily soiIed items

111°F (44°C) • Sturdy whites/ • Removes oils, perspiration,greasy soils

or above cotorfast paste_s and stains

• Diapers • Prevents graying or yellowing

WARM • Dark/non-colorfast colors • Best for moderately soiled to lightly soiled items

90°-110°F • Permanent pressitems • Safe for most fabric finishes

(32°-43°C) • Nylon, polyester, acrylics, • Less fading and dye bleeding

silks, woolens • Reduces wrinkling

• Knits/delicate fabrics

COLD* • Extra-sensitive colors • Best for very lighfiy soiled items

70°-90°F • Non-colorfast items • Saves hot water

(21°-32°C) • Hand washables

*In wash water temperatures colder than 70°F (21°C), detergents do not dissolve well. Also,

soils may be difficult to remove and some fabncs may retain wear wrinkles and have

increased pilling - the formation of small lintdike balls on the surface of garments. Pilling is

the natural result of wearing and washing of garments.