Troubleshooting guide

The dispenser drawer
has four separate compartments
for
adding
laundry
products
to the
wash load.
These compart-
ments
are:
1.
Prewash
Detergent Compartment
2. Main Wash Detergent Compartment
3. Bleach Compartment
4. Fabric Softener Compartment
Laundry
products
are diluted and dispensed automatically
at the
proper
time during
the wash cycle.
The separator between
the Prewash and Main Wash Deter-
gent
Compartments
can be
moved
to accommodate either
liquid
or
powdered
detergents.
(Fig.2-a)
The drawer
release lever
(shown
here is the normal
posi-
tion) can be
installed in alternate
position
(A)
to accommo-
date stacking
a
matching dryer on
top of
the washer.
(Fig.
2-
4)
Refer
to
Use and Care Guide
for
the
Front-Loading Auto-
matic washer
(PN
4619 7020 3971) for
proper
use of
laun-
dry
products.
There are two
routes for the water to enter the
wash
tub.
Most
of the
water
flows through the dispenser assembly.
A
small
portion
of the
water flow
around
the di-
pensers
and
is used to wash the door
window.
1.
Main
Inlet Tube
(Fig.2-5,
A)
2.
Window Washer Inlet Tube
(Fig.
2-5, B)
Air Vent
System
As a safety
feature, the washer
is
designed to allow
fresh
air to circulate through
the tub.
An
inlet vent at the
front of
the
washer
console
brings air
into
the tub
through the
dispenser assembly.
(Fig.
2-6A) The
air
is vented
out
the
back of
the washer.
(Fig.
2-68)
AirVent
Fig.2-3
*tr
Dravver
Releaso
Fig.2-a
Fig.2-5
Fig.2-64
2-2
Fig.2-68