Owner`s manual

ManualsBrandsSears ManualsHousehold AppliancesKenmore Three-Speed with Options and Speeds Switch AUTOMATIC WASHERS

STEP5,Select10to60minutesofsoak

timewiththeAGITATIONTIMEpad.

STEP6.PressSTART.

Thewasheragitatesbrieflyandthen

soaks.Aftersoaking,thewasher

agitatesagainfollowedbydrainand

spin.WhenSOAKisusedalone,it

shouldbefollowedbyawashcycle

withadditionaldetergentadded.

RINSE OPTIONS

Selecting this option

allows you to choose a

DRAIN/SPIN,

RINSE/SPIN or

2ND RINSE.

,=u*DRAIN / SPiN

,m,RINSE/ SPIN

,B 2ND RINSE

To select a Rinse Options setting:

Press RINSE OPTIONS until the

indicator light next to the desired setting

glows.

DRAIN/SPIN

Use this cycle to drain the washer and

spin the load. The spin will be 6 minutes

at high speed.

When to use Drain/Spin:

• To drain the washer after canceling

a cycle.

• To complete a cycle after the power has

been off.

• To shorten drying times for some

heavy fabrics.

• To remove water from rain wear or

beach towels, etc.

To use Drain/Spin:

STEP 1. Press DRAIN/SPIN

STEP 2. Press START.

RINSE/SPIN

Use this option to get a deep rinse with

slow-speed agitation followed by a drain

and two*step spin. (The spin begins at

high speed and steps down to low

speed,) The time display will include an

estimate of how long it will take to fill and

drain the washer.

When to use Rinse/Spin:

• For loads that need rinsing only.

• When using extra detergent with

a load.

• For completing a cycle after the

power has been off.

• To add fabric softener to clothes.

To use or change Rinse/Spin

settings:

STEP 1. Add fabric softener to

the dispenser (if desired).

STEP 2. Press the RINSE OPTIONS

Control until the RINSE/SPIN indicator

light glows.

STEP 3. Press START.

2ND RINSE

Selecting this option provides a second

deep rinse with the same water

temperature as selected for the first

rinse. 2ND Rinse can be added to any

main wash cycle.

CHOOSING MODIFIERS

These controls allow you to select the

desired WATER LEVEL, WASH/RINSE

TEMP, AGITATION TIME, DELAY START

or END OF CYCLE SIGNAL.

WATER LEVEL CONTROL

D-tiJmviJle=m ;I_4 ! [_ 11"=

This control gives you the flexibility

to save water when washing small

loads,

Your washer lets you select a water

level setting based on the size of your

wash load.

You can select up to 5 different water

levels ranging from SMALL LOAD to

LARGE LOAD.

• Adjust water level up or down

depending on your load size. Clothes

should move freely and roll toward

the agitator.

29