Specifications

REMOVING CLOGS

If the cleaner does not seem to have adequate

suction, first check to see if the bag is full.

If the bag is not full, check the hose.

Remove the lower end of the hose from the cleaner by

grasping hose connector, twisting, and pulling straight

out.

Visually inspect the hose and the opening of the

nozzle cover into which the hose is inserted.

If the clog still exists, make sure to turn the vacuum

cleaner off and unplug the power.

Open the nozzle cover and check the agitator area

and suction inlet.

WARNING

Electrical Shock or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical

shock or personal injury from the vacuum cleaner suddenly starting.

Agitator

Hose

Extension

Wand

Crevice

Tool

MODEL 721.36078600