Specifications

REPLACEMENT INSTRUCTIONS

MODEL 721.30678600

Unplug the cleaner.

Place the handle to parallel position. (Fig. A)

Unscrew and remove the light cover. (Fig. B)

To remove old bulb, push it in toward bulb socket

while turning counter-clockwise, then remove. (Fig. C)

Use a bayonet base bulb having the rating of 25W.

To install a new bulb, push it in toward the bulb socket

and turn it clockwise.

Replace the light cover and secure it with screws.

Using a coin to turn the latches, and raise cover.

To replace nozzle cover, insert tabs on the nozzle

cover into slots in the nozzle base.

Then lower nozzle cover onto nozzle base and secure

the latches.

WARNING

Electrical Shock or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical

shock or personal injury from the vacuum cleaner suddenly starting.

Nozzle

Cover

Latches

To Remove