Specifications

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
EXPLANATION OF FEATURES AND CONTROLS
VO L UME
ON/OFF SWITCH
SQUELCH CONTROL
VOLUME ON/OFF SWITCH
CHANNEL I NDICA T OR
AUTO/MAN UAL SWI T CH
Turn clockwise to apply power to the unit and then adjust for desired sound level.
SQUELCH CONTROL
Th is control cuts off or el iminates annoying background noise in the absence of an
incoming signal. Turn fully counterclockwise then slowly clockwise until the
scanning monitor noise disappears. Any signal to be received must now be slightly
stronger than the average received noise. Further clockwise rotation will increase
the threshold level wh ich a signal must overcome in order to be heard. Only strong
signals
will be heard at a maximum clockwise setting.
CHANNEL INDICATOR LIGHTS
The indicator lights (l i ght emitting diodes) show which channel is "on" at any
particular instant. During automatic scan operation, these lights will flash in
sequence
from left to right until a signal is received on one ot the channels.
-1 - .