User manual

Yukon HX Motherboard User Manual

Power Management Setup

Power Management Setup options are described in the following section.

Power Management / APM

Set this option to “Enabled” to enable the power management and APM (Advanced

Power Management) features. The default setting is “Disabled”.

Green PC Monitor Power State

This option specifies the power management state that the Green PC-compliant video

monitor enters after the specified period of display inactivity has expired. The settings

are “Disabled”, “Off”, “Standby”, and “Suspend”. The default setting is “Standby”.

Video Power Down Mode

This option specifies the power management state that the video subsystem enters

after the specified period of display inactivity has expired. The settings are “Disabled”,

“Standby”, and “Suspend”. The default setting is “Standby”.

Hard Disk Power Down Mode

This option specifies the power management state that the hard disk drive enters after

the specified period of display inactivity has expired. The settings are “Disabled”,

“Standby”, and “Suspend”. The default setting is “Suspend”.

Hard Disk Timeout (Min)

This option specifies the length of a period of hard disk inactivity. When this period

expires, the hard disk drive enters the power-conserving mode specified in the “Hard

Disk Power Down Mode” option described above. The settings are “Disabled”, 1 Min,

and all one minute intervals up to and including 14 min. The default setting is

“Disabled”.

Standby Timeout (Min)

Choose the time between 1 and 14 minutes to enter the Standby mode.

Suspend Timeout (Min)

Choose the time between 1 and 14 minutes to enter the suspend mode.