User Manual

Page 6
CUSTOMIZE DISPLAY VARIABLES
CUSTOMIZE VARIABLES
With FlowInspector, you can customize the variables displayed on your flow graph, including the flow rate units (dis-
played on the X axis), the flow total units, and the portion of the data collection period that you wish to view (displayed
on the Y axis).
Selecting Flow Rate and Total Units
The Flow Rate is expressed as a volume of flow over a period of time. FlowInspector allows you to choose from a list
of volume units, and a list of time units, to express your flow rate in the most useful format for your application. From
the Main Screen, click on Show, then Units (or click the button on the Tool Bar), to bring up this screen:
Units screen, showing Flow Rate setting of Gal/Min and Total Flow in Gallons.
On the Units screen, select Units, referring to the abbreviations below.
Volume Time
mL milliliters S Seconds
L Liters M Minutes
G Gallons H Hours
IG Imperial Gallons D Days
CF Cubic Feet
M3 Cubic Meters
MG Million Gallons
Volume
L Liters
G Gallons
IG Imperial Gallons
CF Cubic Feet
M3 Cubic Meters
MG Million Gallons
AF Acre-Feet
AI Acre-Inches
ML MegaLiters
Gk Gallons x 1000
When your Flow Rate and Flow Total units have been selected, Click OK. Your data will now display in the rate and
total units you have selected. At any time, these choices can be changed and the data viewed with different units of
your choice. If you wish to exit the screen without selecting or changing units, Click Cancel. No data will be lost.
Rate Units Total Units
U