Owner manual

1 Introduction
IntroductIon
The FlowInspector Version 1.7 software is designed as part of
the SeaMetrics DL75 Datalogger system. This software is used
to set up the Datalogger and to download data files from it. It
can then be used to view, graph, chart, and print the data in
several formats.
FlowInspector Version 1.7 software allows you to do all of
the following:
■ Set up the Datalogger by selecting measurement
intervals, meter factor (K-factor), and stop/rollover
when full
■ Name the logger and identify the file
■ Download data from the logger
■ Choose flow time and volume units
■ Display flow data in graph format
■ Display and manipulate previously-collected flow
data files stored on the hard drive
■ Zoom to graph smaller time segments with greater
clarity
■ Show maximum, minimum, and average flow rates
for any selected time period
■ Show daily flow totals in tabular form
■ Export data in text file (.txt) and spreadsheet (.xls)
formats
■ Print data reports
ARCHIVED
(2/01/08)