User manual

Seamax Inflatable Boat – English User Manual
- 8 -
3. OPENING your BOAT
The Unpacking
Never use a sharp knife to open the box, it may damage the boat.
Before you unfold the boat, take a good look at how the boat is folded together. Unfold the boat on a flat
surface, inspect and check if all the components are in new condition and not damaged in anyway such as:
valves, plywood seat, foot pump, oars, aluminum side joiners, floor boards, repair kit and carrying-bag.
Remove all components from the box, Find a flat surface and unfold the boat, take the floor boards out along
with the side joiners. Inspect and familiarize yourself with all the components and the safety features of your
new inflatable boat. Knowing the functions of all the components of your boat is very important .Not only for
safety reasons but to assist in any questions or concerns you may have.
Valves
All air valves are preassembled and tested for leaks. To fill remove the front cap and insert pump-hose twist
to lock, ensure that the air valve is in the inflate position. You will notice that there is a 2 position valve
stem .push and twist for the inflate position repeat the opposite direction for the deflate position Each
SEAMAX inflatable boat comes with a spare valve and valve wrench.
Getting started
Locate the foot pump and familiarize yourself with the operation and installation of the air hose into the side
chamber air valves. Inflate the side chambers to about 20% of capacity .this is done to pull the floor fabric