User's Manual
10
Trouble shooting
Trouble
No sound
Not power or
LED
Remote control
not working
Reasons Solution
e audio cables are not properly
connected
Check cable and connections carefully, try a dierent cable
e signal to the soundbar is not PCM,
stereo or 2 channel
Select the audio setting in the TV’s menu and set to PCM, stereo or
2 channel. You cannot use Dolby Audio or DTS output.
Check the power brick power connection and the connection on the
rear of the soundbar. Toggle power on and o with the button the
end cap. Once you see the red LED you have power.
Change batteries with new batteries
Use the remote control within an 8-meter rangeLow signal strength
Loose connection
Low battery power