USER MANUAL OUTDOOR SOUNDBAR MODEL:SB621
What’s in the box (1) Sealoc Weatherproof Outdoor Soundbar (2) HDMI ARC Cable (3) Remote Control (4) AC Adapter (5) Power Cable (6) Digital Optical Cable HDMI ARC Cable ② ⑤ Power Cable ① Sealoc ③ Remote Slim Soundbar Control ⑥ Digital ④ AC Adapter Optical Cable Product Disposal Certain international, national and/or local laws and/or regulations may apply regarding the disposal of this product. Please send the unit to a recycle center that dismantles electronic products.
GENERAL SAFETY PRECAUTIONS WARNING RISK OF ELECTRICAL SHOCK To reduce the risk of electric shock, do not disassemble the unit under any circumstances. No user serviceable parts inside. All product services should be done by SEALOC certified service personnel. Read before operating equipment Thank you for purchasing our product. Before using it, please read this user manual carefully and follow the instructions correctly for safe operation. Please keep this manual handy for future reference.
13. Do NOT, under any circumstances, modify or disassemble this product as it may cause fire, electric shock, or severe damages to the product. Also, any unauthorized modifications made to the product automatically void product warranty. 14. Never touch antenna lines, wires, if applicable, power cables or power plugs in such circumstances as lightning and thunder as it may cause electric shock. 15.
29. Do NOT use any other power cords or connection cables than what is provided with the product or from the manufacturer directly. Use of untested, unauthorized, or substituted power cords or connection cables may be a cause for malfunction, fire, electric shock, or severe damages to the product. Also, such use of improper or undesignated power cords or connection cables will void product warranty. 30.
Product Features -Outdoor waterproof soundbar is a unique product for outdoor use. -There are 6 full range woofer/mid-range drivers with 2 silk dome tweeters. -The Maxxaudio DSP provides a deeper, richer bass signal. -There are 3 DSP EQ mode settings for music, movie with enhanced surround sound and night mode for reduced bass output. -Four inputs are provided, HDMI with ARC, 3.5mm stereo, toslink digital optical and Bluetooth. -It can be mounted using the attached wall mounts or VESA TV mounting hardware.
Note: Please wait a few seconds when you switch the inputs or turn the unit on. The LED indicators will automatically dim in about 20 seconds when there are not commands from the remote control or buttons on the end panel.
Connection ⑤ ⑥ ⑦ ⑧ ① ② ③ ④ Note: Please connect the audio cables before switching on the unit. 1.DC In (Weatherproof) Please use the supplied power AC Adapter (12V/6A) for power connection 2.HDMI ARC Input 3.Optical digital audio input 4.Aux 3.5mm audio input Compatible with Mp3, Smart Phones, tablets and computers etc 5.Power On/OFF Switch the unit’s power on and off 6.Volume Up Turn Up the volume 7.Volume Down Turn down the volume 8.
Basic Operation Rest This button resets the treble and bass settings to their factory default settings. DSP EQ mode settings: · Music mode: this provides enhanced bass response · Movie mode: this provides a three-dimensional surround sound effect. · Night mode: this provides enhanced mid-range response and reduces bass response, this settings is useful for people who have difficulty with hearing the voices on newscasts, etc.
Bluetooth Connection · You must first pair a mobile device to the soundbar the first time you use a particular mobile device. · Turn the power on the soundbar and select Bluetooth, a blue LED will be lit. · Turn on Bluetooth and search for SEALOC on your mobile device. · If you are asked for a password enter 0000 · A confirmation tone will be heard once the connection is paired.
Trouble shooting Trouble No sound Not power or LED Remote control not working 10 Reasons Solution The audio cables are not properly connected Check cable and connections carefully, try a different cable The signal to the soundbar is not PCM, stereo or 2 channel Select the audio setting in the TV’s menu and set to PCM, stereo or 2 channel. You cannot use Dolby Audio or DTS output. Loose connection Check the power brick power connection and the connection on the rear of the soundbar.
