Service manual

Latest products and information available at www.sealite.com.au

AIS Monitoring System

Battery Connection

Tools required:

1 x Allen Key, 6mm

2 x 10mm spanners or small adjustable wrenches.

1 x extra person for lifting.

The cover is already removed. (see Connection of light, Antenna and GPS Cables section of this

manual

• Unscrew the 4 x Hand-Wheels from the corners of the Battery Box Lid.

• Connect the Negative wire to the Negative Battery Terminal. Always connect Negative First!

• Connect the Positive wire to the Positive Battery Terminal

• Replace the Battery Box Lid and secure with the 4 x Hand-Wheels.

• Replace the Solar Panel Housing and secure using the 4 x M8 Socket Head Cap Screws and

Washers.

Testing Lantern Operation

• Place a dark towel or jacket over the lantern.

• When the lantern detects darkness a Indicator LED on the circuit board will start flashing.

• After 30 seconds of continual darkness the lantern will start operating.

For further information please refer to the Sealite SL125 Operator’s Manual.