Service manual

Latestproductsandinformationavailableatwww.sealite.com
9
AIS Monitoring System
with SLC600 Type 2 Power Supply
Figure 3: Battery, Lantern & Antenna Cable Connection
Battery Connection
Toolsrequired:
1xAllenKey,6mm
2x10mmspannersorsmalladjustablewrenches.
1xextrapersonforlifting.
Thecoverisalreadyremoved.(seeConnection of light, Antenna and GPS Cables sectionofthis
manual
• Unscrewthe4xHand-WheelsfromthecornersoftheBatteryBoxLid.
• ConnecttheNegativewiretotheNegativeBatteryTerminal.AlwaysconnectNegativeFirst!
• ConnectthePositivewiretothePositiveBatteryTerminal
• ReplacetheBatteryBoxLidandsecurewiththe4xHand-Wheels.
• ReplacetheSolarPanelHousingandsecureusingthe4xM8SocketHeadCapScrewsand
Washers.
Testing Lantern Operation
• Placeadarktowelorjacketoverthelantern.
• WhenthelanterndetectsdarknessaIndicatorLEDonthecircuitboardwillstartashing.
• After30secondsofcontinualdarknessthelanternwillstartoperating.
ForfurtherinformationpleaserefertotheSealiteSL125Operator’sManual.
Testing the AIS
• Afterthebatteryisconnected,theredstatusLEDshouldblinkwithin5minutestoindicateaGPS
lock.
• TheAISwillnevertransmitwithoutaGPSlock.