Service manual

Latestproductsandinformationavailableatwww.sealite.com
8
AIS Monitoring System
with SLC600 Type 2 Power Supply
Assembly with SLC600 Case
InstallationoftheAISMonitoringSystemincludesthefollowingsteps:-
• Unpacking
• InitialInspection
• InstallingtheAISbaseunit(case)
• Assembly
Unpacking instructions
UnpackallhardwareandverifyallcomponentsareinaccordancewithFigure4,theSLC600system.
PleasecontactyourSealiteofceifthereisanyhardwaremissing.
Initial Inspection
Inspectallhardwarefordamage.Ifthereisanydamage,pleasecontactyourSealiteOfce.Retain
originalpackingmaterialforpossiblefutureuseinshippingtheAISMonitoringSystem.
AssemblyofthefactorysuppliedSL125AISSystemrequiresthefollowing:-
• InstallationofSL125Lantern
• WiringofLanternandAntennae
• Installation&wiringofbattery
• AssemblyofSLC500/600Case
Installation of SL125 Lantern with Mounting Plate
Toolsrequired:
1x6mmAllenKey
1xLargeFlatBladeScrewdriver
1xSmallFlatBladeScrewdriver
• RemovetheFlashAdjustmentPlugfromthebaseoftheLanternusingtheLargeFlatBlade
Screwdriver.Fordetails,pleaserefertotheSL125InstallationManual
• SettheFlashCodeandtheIntensityusingaSmallscrewdriver.FordetailsoftheFlashCodes
tablespleaserefertotheSL125InstallationManual.
• ReplacetheFlashAdjustmentPlugandsecuretightly.
• Removethe4xM8SocketHeadCapScrewsfromthemountingplateontopoftheSLC600Solar
Housing.
• PositiontheSealiteSL125lanternpowercableexitingnearthelanternpowerconnector.
• SecuretheLanternusingthe4xM8SocketHeadCapScrews.
• RemovetheprotectivecapsfromboththeLanternandtheSolarPanelHousing.
• ConnecttheLanternandsecuretightly.
Installation and Assembly Instructions