AIS Monitoring System with SLC600 Type 2 Power Supply Installation & Service Manual Version 1.
AIS Monitoring System • AIS interface displaying accurate positioning & operational information about the AtoN • Low power consumption, making the units ideal for solar AtoN installations • Real time information • IALA recommendations & ITU Publications (ITU-R M.
AIS Monitoring System with SLC600 Type 2 Power Supply Table of Contents Introduction...........................................................................................Page 4 Operating Principle..............................................................................Page 4 Technology............................................................................................Page 4 AIS Monitoring System........................................................................Page 5 Features........
AIS Monitoring System with SLC600 Type 2 Power Supply Introduction Congratulations! By choosing to purchase a Sealite lantern you have become the owner of one of the most advanced LED marine lanterns in the world. Sealite Pty Ltd has been manufacturing lanterns for over 20 years, and particular care has been taken to ensure your lantern gives years of service.
AIS Monitoring System with SLC600 Type 2 Power Supply AIS Monitoring System The Automated Identification System (AIS) is a broadcast system which operates in the VHF maritime mobile band. It is capable of sending ship or AtoN (Aid to Navigation) information such as identification, position, course, speed and more to other ships and to shore. A special access technology is used to allow rapid update rates for multiple reports within the otherwise limited capabilities of VHF.
AIS Monitoring System with SLC600 Type 2 Power Supply AIS System Components Figure 1: Automated Identification System – SLC600 Case Latest products and information available at www.sealite.
AIS Monitoring System with SLC600 Type 2 Power Supply About the AIS System Sealite’s AIS AtoN (Automated Identification System) operates in the international VHF Maritime Mobile Band, enabling Port Authorities and other users to remotely monitor the real-time status of their AtoN installation, whilst providing mariners in the broadcasting region crucial Message 21 information (as defined by the international Telecommunications Union (ITU)) about the navigation aid.
AIS Monitoring System with SLC600 Type 2 Power Supply Installation and Assembly Instructions Installation of the AIS Monitoring System includes the following steps:• Unpacking • Initial Inspection • Installing the AIS base unit (case) • Assembly Unpacking instructions Unpack all hardware and verify all components are in accordance with Figure 4, the SLC600 system. Please contact your Sealite office if there is any hardware missing. Initial Inspection Inspect all hardware for damage.
AIS Monitoring System with SLC600 Type 2 Power Supply Battery Connection Tools required: 1 x Allen Key, 6mm 2 x 10mm spanners or small adjustable wrenches. 1 x extra person for lifting. The cover is already removed. (see Connection of light, Antenna and GPS Cables section of this manual • Unscrew the 4 x Hand-Wheels from the corners of the Battery Box Lid. • Connect the Negative wire to the Negative Battery Terminal.
AIS Monitoring System with SLC600 Type 2 Power Supply Figure 4: Installation of SL125 Lantern and Antenna No Description Qty 1 Sealite Lantern, SL125 1 2 M8 x 30mm Socket Head Cap Screw 4 3 M8 Spring Washer 8 4 M8 Penny Washer 8 5 M8 x 40mm Socket Head Cap Screw 4 Latest products and information available at www.sealite.
AIS Monitoring System with SLC600 Type 2 Power Supply Reprogramming the AIS Unit If reprogramming is required, the customer will need assistance from Sealite Technical Support. Please contact Sealite: Tel: +61 3 5977 6128 Email: info@sealite.com AIS Display Software There are number of AIS software packages available to display vessel traffic and Aids to Navigation data. Your AIS receiving software package will need to be adapted to interpret Message 6 data that is Sealite specific to the SL125 Beacon.
AIS Monitoring System with SLC600 Type 2 Power Supply Trouble Shooting Problem Remedy Lantern will not activate. • • • • • Timing codes will not change. • Turn rotary switches several times to ensure contacts are clear. Lantern will not operate for the entire night. • Expose lantern to direct sunlight and monitor operation for several days. Sealite products typically require 1.5 hours of direct sunlight per day to retain full autonomy.
AIS Monitoring System with SLC600 Type 2 Power Supply All Sealite boards are fitted with two Indicator LED’s. These are positioned near the Flash Code Rotary Switches. Use the table below to help determine operational status. Yellow LED Lantern Status Lantern OFF Normal OFF Lantern is in Daylight and in Dusk till Dawn mode or in Standby Mode Flashing ON 0.15 seconds OFF 0.15 seconds Normal OFF Light is activating and will turn on after detecting 30 seconds of continuous darkness.
AIS Monitoring System with SLC600 Type 2 Power Supply Sealite LED Light Warranty V2.1 Activating the Warranty Upon purchase, the Sealite Pty Ltd warranty must be activated for recognition of future claims. To do this you have two (2) options: 1. Postal Registration - please complete the Sealite Warranty Registration Card and return to Sealite within 30 days of your purchase. 2. Online Registration - please complete the Online Registration Form at; www.sealite.
AIS Monitoring System with SLC600 Type 2 Power Supply 3. The customer must give Sealite Pty Ltd notice of any defect with the product within 30 days of the customer becoming aware of the defect. 4. Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. Typical battery replacement period is 3-4 years. Long term exposure to high temperatures will shorten the battery life.
AIS Monitoring System with SLC600 Type 2 Power Supply Other Sealite Products Available Marine Lanterns (1-12nm+) Monitoring & Control Systems Bridge & Barge Lights Marine Buoys (up to 3mt in diameter) Area Lighting Mooring Systems & Accessories Head Office Sealite Pty Ltd 11 Industrial Drive Somerville, Vic 3912 Australia Tel: +61 3 5977 6128 Fax: +61 3 5977 6124 Email: info@sealite.com Internet: www.sealite.com Latest products and information available at www.sealite.
